OU FLEX -027 INSTALLATION AND OPERATION MANUAL
PAGE 7
CONNECTING TO THE OU FLEX SHELF
Modem Configuration
Connect to the Modem either via the:
• WIFI SSID OU FLEX 027
• Or directly from the front panel LAN ports
Your computer should be configured in DHCP mode
If the modem is attached directly to the internal router which acts as a DHCP server for the
computer.
Browse to the web interface » Type the modem’s address in the address bar of the browser:
Default IP Address: 192.168.1.1
The first time your modem starts up, you are prompted for the Expert password in order to
start the installation procedure. If your OU FLEX shelf has already been installed before,
you are re-directed to the Status page of the terminal.
When the terminal is not linked to the satellite network, after three minutes, the computer
will automatically receive its IP address, via DHCP, from the modem and you will then be
able to browse the web interface. If no DHCP address is assigned to your terminal: remove
the Ethernet cable from your computer, wait a few seconds, and plug the Ethernet cable
back into your computer. If the problem remains, you need to assign a static IP address to
your computer.
NOTE the AIR MAC ADDRESS
You will need this to access the OU-FLEX space segment.
