4K HDBaseT 6x6 Matrix Switcher
10
4.2 IR Control
By using IR & HDBaseT transmission technology, the MPM-66-IR-N has some functions
as follows:
1)
Control far-end output device from local.
2)
Control local input/output device remotely.
3)
Control the MPM-66-IR-N locally/remotely.
4.2.1 Usage of IR Remote
①
Standby button, press it to enter/ exit standby
mode
②
Input channels, range from 1~6 (buttons 7, 8
are not available), corresponding IR signal
switched synchronously when switching input
channels.
③
Menu buttons,
ALL
,
EDID
and
CLEAR
, same
with the corresponding front panel buttons.
Please refer to
4.1 Front Panel Button Control
for details.
④
: Navigation buttons.
ENTER: Confirm button.
⑤
Output channels, range from 1~6 (buttons 7,
8 are not available).
Each channel has 1 IR IN, 1 HDBaseT, 1
RS232, and 1 AUDIO outputs, and channel
1~3 have HDMI outputs.
Note:
With this IR remote, MPM-66-IR-N can be controlled by the built-in IR, the
extended IR receiver connected to the
“IR EYE”/”IR ALL IN” and the IR receiver on the
far-end receiver.
