4K HDBaseT 6x6 Matrix Switcher
25
4.4 TCP/IP Control
MPM-66-IR-N boasts option TCP/IP port for IP control.
Default settings: IP: 192.168.0.178; Subnet Mast: 255.255.255.0; Gateway: 192.168.0.1;
Serial Port: 8080.
IP& gateway can be changed as you need, Serial Port cannot be changed.
Connect the ethernet port of control device and TCP/IP port of MPM-66-IR-N, and set
same network segment for the 2 devices, users are able to control the device via
web-based GUI or designed TCP/IP communication software.
4.4.1 Control Modes
MPM-66-IR-N can be controlled by PC without ethernet access or PC(s) within a LAN.
Controlled by PC without ethernet access
Connect a computer to the TCP/IP port of the MPM-66-IR-N, and set its network
segment to the same as the MPM-66-IR-N
’s.
Controlled by PC(s) in LAN
Connect MPM-66-IR-N, a router and several PCs to setup a LAN (as shown in the
following figure). Set the network segment of MPM-66-IR-N
to the same as the router’s,
then PCs within the LAN are able to control MPM-66-IR-N.
Same network
segment as the
switcher
