Milestone MacroPATH Basic QX Series, Operator'S Manual

Page: 65 / 128

MacroPATH and MacroPATH Basic QX Series MM161-001
– Operator Manual
65
4. MacroPATH as MULTISTATION VIEWER
4.1. How to install MacroPATH as viewer
It is possible to install MacroPATH in all the desired computers without license, using the software provided
in electronic format (for example, the office of every individual pathologist).
In this case MacroPATH will only work as a viewer, simply allowing images to be retrieved, by using either
the barcode or manually entering the case name. The images can only be viewed but not edited.
To carry out any edits on the images (such as adding notes, sections etc.), a MacroPATH software license
must be available. Contact your local dealer.
MacroPATH as viewer is the same software installed on the MacroPATH unit and it does not need a new
license. Therefore, the user is authorised to install MacroPATH software as Viewer on any PC.
For license activation see chapter 3.6.3.
MacroPATH Viewer can be installed on any computer: using the MacroPATH USB key and open the
MacroPATH folder. Click on Set Up installer and follow the instructions set out in chapter 2.7 to proceed with
MacroPATH software installation.
The first time MacroPATH is installed on a PC the FULL feature license is provided for a
trial period of 90 days free of charge. After 90 days, if a license is not activated you will
only have access as MacroPATH Viewer. Refer to chapter 6.20 for further information on
licenses.