Installation Instructions
PAC780/782/784
7
3.
Remove four button head screws from bracket at end of
inner column. (See Figure 9)
Figure 9
4.
With gas spring assembly (A) inside the inner column, slide
spring assembly up until the center plate rests against the
bracket at bottom of inner column. (See Figure 9)
5.
Fasten gas spring assembly (A) through bracket at bottom
of inner column to inner column, using four button head
screws removed in Step 3. (See Figure 9)
6.
With gas spring assembly (A) fastened to the inner column,
slide inner column of cart/stand up through outer column,
and out the top of the outer column. (See Figure 10)
Figure 10
7.
Fasten gas spring mount for stand (B) to gas spring
assembly (A) using the button head screw and nut removed
in Step 1. (See Figure 11)
Figure 11
Completing Installation to Cart/Stand
1.
Place plate on gas spring mount for stand (B) [or plate on
gas spring assembly (A) for cart] at top of upper cart/stand
column. (See Figure 1)
Figure 12
(A)
(columns shown as transparent)
Center
plate
Bottom of
stand column
x 4
5
3
Bracket at
bottom of
inner column
6
Top of outer
column
(columns shown as transparent)
x
(A)
7
x
(B)
x 1
(A)
(cart shown)
Cart/stand
inner column
