Installation Instructions
FSB4041
3
TOOLS / PARTS FOR INSTALLATION
D (1)
[Interface
Bracket]
G (1)
1/8"
1/8"
(Included)
A (4)
M8 x 25mm
B (4)
M8 x 20mm
C (4)
10-24 x 1/2"
E (4)
[Mounting buttons]
F (4)
.875x.330x.375"
ASSEMBLY AND INSTALLATION
NOTE:
For mounts with the Q2™ mounting system (FSM,
FPM, FSP, FDP Series products)
proceed to Step 1.
Proceed to Step 2 for all other mounts.
1.
Attach mounting buttons (E) to interface bracket (D) using
four 10-24 x 1/2" button head cap screws (C) and the 1/8"
hex key (G). (See Figure 1)
Figure 1
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Using screws of
improper size may damage your display. Properly sized
screws will easily and completely thread into display mounting
holes. If spacers are required, be sure to use longer screws of
the same diameter.
2.
Attach interface bracket (D) to back of display using four
M8 x 20mm Phillips cap head screws (B)
or
four M8 x 25mm
Phillips cap head screws (A), and four spacers (F). (See
Figure 2)
Figure 2
3.
Complete the installation following the mount installation
instructions.
1
(C) x 4
(D)
(E)
(D)
2
(A or B) x 4
(H) x 4
