Milestone 372700, Operator'S Manual

Page: 54 / 108

MacroVIEW MM179-001 - Operator Manual
54
3.7.8. Digital Zoom tool
Zoom
Press the button and hold it for a few seconds with the mouse or directly on the touch screen: you
may select the type of digital zoom, as shown below.
Before being able to use this tool, you must calibrate the image, as explained in Chapter
3.7.2 for the Sizing tool.
This type of zoom is DIGITAL. To execute an optical zoom, go back to LIVE and perform
the zoom before taking a picture. The digital zoom is useful when the sample is no longer
available to be photographed LIVE.
Cassettes
multifunction
keypad
Cassettes
Settings
multifunction
keypad
Select the concerned area on the image where you want to
automatically apply a digital zoom.
Zoom In: Press the image, with each click it zooms in.
Zoom out: (to use after having used Zoom In) Press the image, with
each click a step just made with Zoom In is eliminated.
Press the image after having used the digital zoom, the image
automatically goes back to the original status (no zoom).
Press the image after having performed the digital zoom and keep it
pressed to move the zoom area.