Milestone 372700, Operator'S Manual

Page: 48 / 108

MacroVIEW MM179-001 - Operator Manual
48
3.7. EDIT functions
Click the image once to automatically activate the EDIT mode or press the EDIT button, as indicated below.
In this section you may add texts, measurements, graphical elements and sections to the image, examine
the sample, record audios and videos and print directly using the buttons in the left side bar (indicated by the
arrow in the previous figure).
When the image has been edited, click “Save” in the bottom part of the image to save the changes, or else
click “Save” on the manipulator or the “Live” button at the top right (a confirmation message appears
automatically to save).
The image editing buttons are described below.
When an edited image is saved and entered among the thumbnails, the original image is
STORED.