4K Presentation Switcher with Soft Codec & Matrix Outputs
26
Command
Function
Command & Feedback
Example
INPUT SELECT when auto operation.
param1 = (1 ~ 100) and the unit is
second.
SECONDS
#GET_DIS_INPUT_DEL
AY
Get the delay time of sending RS232
command to DISPLAY ON and DISPLAY
INPUT SELECT when auto operation.
#GET_DIS_INPUT_DELAY
@DISPLAY_INPUT_DELAY x
SECONDS
6.3.7 Trigger Setting Command
Command
Function
Command & Feedback
Example
#AUTO_CEC_SET_PAN
EL_OPEN
Enable the system auto function.
#AUTO_CEC_SET_PANEL_
OPEN
@OPEN CEC DISPLAY
ON/OFF WHEN
SIGNAL/NOSIGNAL
#AUTO_CEC_SET_PAN
EL_CLOSE
Disable the system auto function.
#AUTO_CEC_SET_PANEL_C
LOSE
@CLOSE CEC DISPLAY
ON/OFF WHEN
SIGNAL/NOSIGNAL
#GET_AUTO_CEC_SET
_PANEL
Get the status of system auto function.
#GET_AUTO_CEC_SET_PA
NEL
@OPEN CEC DISPLAY
ON/OFF WHEN
SIGNAL/NOSIGNAL
@CLOSE CEC DISPLAY
ON/OFF WHEN
SIGNAL/NOSIGNAL
#AUTO_CEC_PANEL_TI
ME (param1)
Set the delay time of auto operation when
detecting all input sources were moved.
param1 = (0 ~10000), and the unit is
minute.
#AUTO_CEC_PANEL_TIME
@DELAY TIME TO %d
MINUTES,TO TURN OFF
THE DISPLAY IF NO
SOURCE DETECTED
#GET_AUTO_CEC_PAN
EL_TIME
Get the delay time of auto operation when
detecting all input sources were moved.
#GET_AUTO_CEC_PANEL_T
IME
@DELAY TIME TO %d
MINUTES,TO TURN OFF
THE DISPLAY IF NO
SOURCE DETECTED
