18G 4x1 Presentation Switcher with Soft Codec & Wireless BYOD
19
Command
Description
Command & Feedback
Example
#SET_DTIME [PARAM1]:
[PARAM2]
When not detecting video input signal, set the
auto power-off time of display device to
[PARAM1]: [PARAM2]. The default time is 10
minutes.
[PARAM1]=0~30 minutes.
[PARAM2]=0~1800 seconds.
#SET_DTIME 1:30
@DTIME 1:30
#GET_DTIME
Get the auto power-off time of display device.
@DTIME 30:0
6.2.5 Special Commands
Note:
The below commands don’t need ending mark.
Command
Description
Command & Feedback
Example
#SET_ON_[PARAM1]_
[PARAM2]:XXXX
Set the ASCII RS232 command
XXXX
to be
sent to control the third-party device when
the
DISPLAY ON
button is pressed.
[PARAM1] = 00~06 (Baud Rate)
00 - 115200
01 - 57600
02 - 38400
03 - 19200
04 - 9600
05 - 4800
06 - 2400
[PARAM2] = 00~99. The delay time of
sending command.
XXXX: Any ASCII code (up to 48 bytes).
#SET_ON_05_30:123456
7
@BAUDRATE: 4800
@DELAY TIME: 30 s
@DISPLAY ON TO
SEND:1234567
