Scaler Switcher with Digital Amplifier-TN
10
4.2.3. System Setting
The Third icon from left of the OSD menu is system setting, which includes OSD
language setting, listen,
freeze
, VGA setting, output adjustment etc.
Listen
: Audio output only. To resume video output, please press button
“MENU”.
VGA setting
: Adjust the H/V signal of VGA input, includes auto adjustment.
Output adjustment
: Adjust H/V size and H/V position of the output. This function is
available only with HDMI and VGA inputs.
4.3. Firmware Update
MP-SC-12D-TN supports firmware field-updating by USB flash disk.
The operation
procedures are:
1)
Copy the file “MT23ATV.bin” to a USB flash disk. (The “MT23ATV.bin” file is
provided/ authorized by our engineering department)
2)
Plug the USB flash disk to the USB port on MP-SC-12D-TN.
3)
Pressing the button
“HDMI” on the front panel for 6 seconds or sending RS232
command 0698% for updating, then press the button
“OK” on the remote or send
RS232 command 0609% to confirm update. MP-SC-12D-TN will capture the new
firmware from USB flash disk.
4)
After finishing update, reboot and send the command
“
0617%
” to reset to factory
settings.
5)
After reset, reboot again.
Notice:
The name of the update file must be
MT23ATV.bin
.
