User Manual
www.milesight.com
54
And meanwhile the area will be synchronized in IPC.
Step2. Select the schedule, sensitivity and trigger area for motion detection.
[Enable IPC‟s Motion Schedule]
: If it is enabled here, motion detect will take effect
7*24h
; If it
is not enabled, motion detect will take effect as the schedule which is
set on the IPC web
.
[All Set]
: Set all area as the trigger area;
[All Clear]
: Clear all trigger area;
[Sensitivity]
: Set sensitivity for motion detection, range from 1 to 10.It will synchronize to IPC if
you set sensitivity here;
[Action]
: Edit action once motion is detected, refers to next step;
Step3. Select the desired channel and click [Edit] to configure motion detection action.
F-3.5.10