User Manual
www.milesight.com
41
1. Enter the PPPoE setting interface:
Configure > Advanced Settings > PPPoE
Figure 4-21
2. Check the Enable PPPoE checkbox to enable this feature.
3. Enter User name,Password and Confirm password for PPPoE access.
Note:
1) The obtained IP address is dynamically assigned via PPPoE,so the IP address always changes
after rebooting the camera.To solve the inconvenience of thedynamic IP, you need to get a domain
name from the DDNS provider (E.g.DynDns.com).Refers to 4.4.3.
2) The user name and password should be assigned by your ISP.
4.4.5 VLAN
VLAN (Virtual Local Area Network) from the logical rather than physical, the entire LAN split into
several different broadcast domains, data can only be exchanged within a VLAN.
A slightly large scale network if there are only a broadcast domain, so constantly send broadcast
packets within the network, it is easy to cause the broadcast storm network overall bandwidth
consumption, and to give the network to bring extra burden to the host.After the division of VLAN,
the data will only be broadcast in own VLAN, so you can control the broadcast storm, also can
enhance network security, simplified network management.
Routers provide the VLAN function based on port,the number of the router LAN can logically
divided into multiple VLANs.