Milesight AM100 Series, User Manual, Page: 21 / 27

21
Via ToolBox App: Go to “Device->Reset” to click “Reset”, then attach smart phone with NFC area
to device to complete reset.
5. Installation
5.1 Installation Note
In order to ensure the best detection and LoRaWAN ® communication effect, it is recommended
to install AM100 series as follows:

There should not be any isolates or barriers in PIR and light detection range.

Do not mount the device where the temperature is below/above operating range and
temperature varies greatly.

Stay far away from any heat source or cold source like oven, refrigerator.

Do not mount the device close to where airflow varies greatly like windows, vent, fan and air
conditioner.

Do not mount the device upside down.

Do not place the device right to the window or door. If you have to, you’d better pull the
curtain.

It is recommended to install at least 1.5m high from floor.