Milesight Technology MS-C2964-PB, User Manual

Page: 83 / 89

77
Scenario Mode Select Indoor or Outdoor mode to meet your needs
Camera Installation
Select camera installation view, including Angle View, Horizontal View and
Overhead View
Analysis Type Select Standard or Advanced analysis type
License Generated by camera’s information
License Status Show present license status, including Valid, Invalid, Expired, Unactivated
Minimum Size
Draw the screen or input pixel number to set the minimum size of the
detected object. When the object is smaller than this size, it will not be
detected. The default minimum size is 3*3.
Maximum Size
Draw the screen or input pixel number to set the maximum size of the
detected object. When the object is larger than this size, it will not be
detected. The default maximum size is 320*240.
4.5.6 Fisheye
PTZ
Table 4-5-14 Description of the buttons
Parameters Function Introduction
Zoom Status
Support to set display time of Zoom Status OSD.
2 seconds/5 seconds/10 seconds/Always Open/Always Close are available.
Preset Status
Support to set display time of Preset Status OSD.
2 seconds/5 seconds/10 seconds/Always Open/Always Close are available.