2
Power & Charging
Before using the board, you must fully charge the battery.
1. Connect the supplied micro USB able to your remote and fully charge it with
any device that supports USB charging.
2. The remote battery level will be displayed in the top left corner of the screen.
3. When the battery icon is full and stops flashing, the battery is fully charged.
Red – Board is charging
Green – Board Battery is full
TIP:
Disconnect the wall charger from you
board once it is fully charged to help extend the
batteries life.
Using the wall charger provided, plug in your
Rampage.
The
charging port
(1)
is located underneath the
deck on the back-left portion of the battery pack.
Remove the safety cap that prevents water and
dust from entering the port and plug in the board.
Charging can take some time, so it is best to place your board on charge after
any ride, this will keep the battery fully charged and ready whenever you are.
The charging block has a battery indication light so you know when it is full.
