Quick Setup Guide for MEC-5-FSL D3400-N85 Miles Eye Camera
8
Setting the Viewfinder Focus (very important for all users)
9.
IMPORTANT: Adjust the Eyepiece Dioptric setting
.
(Initial Setup Only)
This is a small rotary
switch to the right of the viewfinder that can go up or down through several positions, and is designed
to match the viewfinder optics to your vision. When this is set: if you see the subject in focus, the
camera sees it in focus. If you normally wear corrective lenses, always wear them when taking a
picture. To make this adjustment for your eye:
How to Set Eyepiece Focus
1.
Move the rotary switch to one end of the range (all the way up
or down).
2.
Look through the viewfinder at a bright surface (such as a
white wall) that is in the distance (this white surface should
appear blurry).
3.
While viewing through the viewfinder, move the switch up
and down through the range of positions until you can
see the
black brackets ( [ ] ) in the viewfinder
with
maximum
clarity
and
focus
.
4.
Note the optimal position of this switch for your vision, and
always use this setting
. Once you set it for your eye’s vision,
you do not need to change it. If someone else uses the camera,
they need to find the correct setting for their vision (and when
you resume using the camera, you need to return this switch
to the setting you found for your vision).
