background image

WARRANTY

Mile Marker/Selectro Hubs and Conversion Kits Limited Warranty
Mile Marker Industries warrants directly to the first purchaser that part numbers 427, 428, and all “Selectro Classic” 

models will be free from defect in material and workmanship appearing under normal use and service for a period 

of one year. 
Mile Marker Industries warrants directly to the first purchaser that part numbers 426, 438, and 460 will be free from 

defect in material and workmanship appearing under normal use and service for a period of two years. 
Mile Marker Industries warrants directly to the first purchaser that part numbers 104, 302, 423, 430, 435, 436, 449SS, 

457, 459SS, 466, 470, 481, 490 and 549 will be free from defect in material and workmanship appearing under 

normal use and service for as long as said purchaser owns the Premium Locking Hubs. 
Mile Marker Industries warrants directly to the first purchaser that all Mile Marker Conversion Kits will be free from 

defect in material and workmanship appearing under normal use and service for a period of one year.
Warranty registration must be submitted at milemarker.com/warranty within thirty days of purchase by the end user. 

If you discover a hidden defect, Mile Marker will, as its option, repair or replace the product or necessary 

replacement parts at no charge to you, provided you remove the product from the vehicle and return it prepaid to 

Mile Marker Industries. If the product was purchased in the United States, the owner must contact our warranty 

department to get a Return Goods Authorization (RGA) number before returning the product. If the product was 

purchased outside the United States, the owner must return the product to the original place of purchase.
Mile Marker Industries Hydraulic Winch Limited Warranty

Mile Marker Industries warrants each winch when used in normal service against factory defects in materials and 

workmanship to the original commercial and recreational purchaser for the period of five years. New cable 

assemblies are warranted against defects in workmanship and materials when received by the retail purchaser. 

There is no applicable warranty for cable assemblies after initial use. Excluded from this warranty are the finish of 

the winch and any condition Mile Marker determines to have been caused by misuse or abnormal use. Warranty 

registration must be submitted at milemarker.com/warranty within thirty days by the end user. Warranty submissions 

must reference winch serial number to be valid. Warranty will only be valid for the original purchaser of the winch 

and installed on the vehicle for which it was originally registered. The owner will be responsible for removing the 

winch and returning it to Mile Marker freight prepaid unless a determination is made that replacement parts can 

be sent out which will remedy the problem. Mile Marker will repair or replace any or all winch parts, which after 

inspection determines to be defective. If the product was purchased in the United States, the owner must contact our 

warranty department to get a Return Goods Authorization (RGA) number before returning the product. If the product 

was purchased outside the United States, the owner must return the product to the original place of purchase.
Mile Marker Industries Electric Winch Limited Two Year Warranty

Mile Marker, Industries offers a limited two year warranty to the original retail purchaser for each new Mile 

Marker electric winch, used as a recreational recovery winch only, against manufacturing defects in workmanship 

and materials on all mechanical components. Electrical components consisting of motors, solenoids, wiring, wire 

connectors and associated parts have a limited one year warranty. New cable assemblies are warranted against 

defects in workmanship and materials when received by the retail purchaser. There is no applicable warranty for 

cable assemblies after initial use. Excluded from this warranty are the finish of the winch and any condition Mile 

Marker determines to have been caused by misuse or abnormal use. Warranty registration must be submitted at 

milemarker.com/warranty within thirty days by the end user. Warranty submissions must reference winch serial 

number to be valid. Warranty will only be valid for the original purchaser of the winch and installed on the vehicle 

for which it was originally registered. The owner will be responsible for removing the winch and returning it to Mile 

Marker freight prepaid unless a determination is made that replacement parts can be sent out which will remedy the 

problem. Mile Marker will repair or replace any or all winch parts, which after inspection determines to be defective. 

If the product was purchased in the United States, the owner must contact our warranty department to get a Return 

Goods Authorization (RGA) number before returning the product. If the product was purchased outside the United 

States, the owner must return the product to the original place of purchase.

For full warranty and general warranty procedure and policy visit milemarker.com/warranty

Summary of Contents for 76-50246BW





















Reviews: