4.
Installation
It is easy to install the Milan Vortex Wireless Multisensor.
Figure 1: Milan Vortex Wireless Multisensor
Step 1: Release the cover tab to open the cover and insert the batteries in its compartment. The LED will
now begin to flash slowly
Step 2:
Integrate the Milan Vortex Wireless Multisensor with a Milan Infoway
a.
Ensure that the Milan Infoway is functional
b.
Open Milan Infomap configuration tool in a web browser (see separate instructions for using
this software)
c.
Click on the “Security” tab from the Milan Infomap menu
d.
Click on the “Wireless Security” tab from the Milan Infomap menu
e.
Click the “Add” button
f.
Press the Program Switch (see Figure 1) at the bottom of the sensor twice in quick
succession
g.
Check if this sensor has been added to the list of wireless devices in Milan Infomap (when
successfully added you will see the Product Name, Manufacturer, Product Type and the
Node ID)
h.
If the sensor has not been added to Milan Infomap, please repeat steps f and g above
ensuring that the Milan Infomap is still in the Add mode in the Wireless tab
i.
Should you ever need to remove this sensor from your Milan DLE, please follow the same
steps as above except select the “Remove” button in step e above
Step 3: Install Milan Vortex Wireless Multisensor in the desired place (use adhesive tape for affixing to
walls). You can now experience the benefits of Milan DLE offered by this product.
Summary of Contents for SLEV05
Page 1: ...MILAN VORTEX WIRELESS MULTISENSOR USER MANUAL ...
Page 7: ......
