4.
Installation
It is easy to install the Milan Vortex Wireless Siren.
Figure 1: Milan Vortex Wireless Siren
Step 1: Release the cover tab to open the cover by pressing the locking tab and insert the batteries in its
compartment. Now the LED will now begin to flash slowly
Step 2: Integrate the Milan Vortex Wireless Siren with a Milan Infoway
a.
Ensure that the Milan Infoway is functional
b.
Open Milan Infomap configuration tool in a web browser (see separate instructions for using
this software)
c.
Click on the “Security” tab from the Milan Infomap menu
d.
Click on the “Wireless Security” tab from the Milan Infomap menu
e.
Click the “Add” button
f.
Press the Program Switch (see Figure 1) at the back of the device twice in quick succession
g.
Check if this device has been added to the list of wireless devices in Milan Infomap (when
successfully added you will see the Product Name, Manufacturer, Product Type and the
Node ID)
h.
If the device has not been added to Milan Infomap, please repeat steps f and g above
ensuring that the Milan Infomap is still in the Add mode in the Wireless tab
i.
Should you ever need to remove this device from your Milan DLE, please follow the same
steps as above except select the “Remove” button in step e above
Step 3: Install Milan Vortex Wireless Siren in the desired place with adhesive tape or with screws on the
wall. You can now experience the benefits of Milan DLE offered by this product.
Summary of Contents for Milan Vortex SLEN01
Page 1: ...MILAN VORTEX WIRELESS SIREN USER MANUAL...
Page 7: ......
