1. 8 ports 10/100Base-TX Module
1
100
LK/ACT
FD/COL
MIL-S3630
2
3
4
5
6
7
8
Figure 1.
Front Panel
When installed into a Switch hub, the 10/100Base-TX Module provides 8
10/100Mbps Switch ports which can connect to 10Mbps or 100Mbps hub or end
station.
1-1. 8 Ports 10/100Base-Tx Module Features
!
8 10/100Base-TX N-Way Switch ports.
!
Conforms to IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
!
Store and forward switch architecture for abnormal packet filtering
!
Support for half and full duplex on all ports
!
Backplane up to 2.4Gbps
!
2M memory Buffer support
!
Automatic address learning with 12K address entry storage
!
Filtering and forwarding rate of 14,880~148,800 packets per second
!
DIP Switch for decision connection mode with other network devices
1-2. DIP Switch with Link Mode
The 8 port 10/100Base-TX module provides dip switch for 1 to 4 port to adjust link
mode with other network devices. Another 4 ports use auto-negotiation protocol
only. There are three type of link mode can be chosen, Auto-negotiation,
100Mbps/Full duplex and 10Mbps/Full duplex.
P o rt 1
P o rt 2
P o rt 3
P o rt 4
D IP S w itch fo r
P o rt 1 to P ort 4
ad ju stab le
p orts
A u to -
n eg o tiatio n
F ull D u p lex
1 0 0 M
P o rt 5
P o rt 6
P o rt 7
P o rt 8
8
7
6
5
4
3
2
1
1 0 M
O N
P o rt 1
P o rt 2
P o rt 4
P o rt 3
O FF
2
1
Figure 2.
Dip switch location and mode settings
If you adjust to auto-negotiation, then the DIP for 100Mbps and 10Mbps is not
effective. If you adjust to Full duplex, then the DIP for 100Mbps and 10Mbps is
effective.
