16
Start Cleaning
Place the robot
Select cleaning mode and press
button start cleaning. For better
cleaning efficiency, please place the
robot stably against walls and keep
0.5m away from any obstacles.
Press
button again to stop the robot
from cleaning.
The robot will work out the best cleaning path when running. If the robot is
moved manually or by remote control, it gets disrupted and will work out a
new cleaning path. In order to improve cleaning efficiency and reduce
repeated cleaning, please do not move the robot when it
’
s cleaning.
Attention
1.The robot will return to the starting point when clean water runs out
or the dirty water tank is full. Users should refill the clean water or
empty the dirty water according to its voice prompts. Put the robot
to the place where it stops cleaning and press the clean button to
continue the work.
2.Please empty the dirty water tank after each cleaning, as well as
cleaning up and maintaining the robot.
Spot mode
Recommended to clean a localized area with heavy stains. The robot cleans
in
“
spiral
”
path and return to the starting point and goes into standby mode
when cleaning finished automatically.
(The below right picture shows the cleaning path of Spot mode, subject to
the actual situation. )
2.6 ft
2.
6
ft
For more details, please visit
AguaBot 21
