6
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
EPIW104
User Manual
ver.1.2
2.2 Channel states and configuration
Channel description in the web
based GUI of the device
State of relays 1
POE power out on eth 1
LED indicators 1
“no”outlet of
terminal blocks
“nc” outlet of
terminal blocks 1
Table 1
2.3 Power input assignment
There are two different
•
Passive POE input on Ethernet port 1
(for pin allocation see Table2 on page 6)
•
External power Input through the Terminal Block connector
In both cases the power input can be:
•
9-42V AC or
•
8-56V DC
Please note,
functions properly, but the outgoing POE power pin
reversed compared with the default
PingBrother EPIW104 user manual
2011 Mikroweb Internet ltd
.
PingBrother is watching
.2 Channel states and configuration
State of channels
1. (default)
description in the web
based GUI of the device
on
State of relays 1-4
not energized
POE power out on eth 1-4
on
LED indicators 1-4
on
s 1-4
open
terminal blocks 1-4
closed
.3 Power input assignment
There are two different options to power the device
Passive POE input on Ethernet port 1
(for pin allocation see Table2 on page 6)
External power Input through the Terminal Block connector
the power input can be:
42V AC or
56V DC
Please note, in case of a reverse DC power input the device
properly, but the outgoing POE power pin
compared with the default (See Table2 on page 6)
PingBrother is watchingyournetworkdevices
State of channels
2.
off
energized
off
off
closed
open
External power Input through the Terminal Block connector
ut the device
properly, but the outgoing POE power pin-out will be also
(See Table2 on page 6)
