Mikrotron MC1324, User Manual

Page: 41 / 45

Technical Data MC132x Users Manual Rev. 0.22
41
9.4.1.1 Respective codes for the clock synthesizer
Each frequency pair corresponds to two hexadecimal codes that are used to program the synthesizer.
These are also obtained on a read Camera Profile (
:w ) command.
Codes
Step Pixel co-
des
in MHz Sensor codes
(MHz) for:
10 < Line-
length <= 100
Pixel Sensor codes
(MHz) for:
100 < Line
length <=
240 Pixel Sensor codes
(MHz) for:
240 < Line
length <=
640 Pixel Sensor codes
(MHz) for:
640 < Line
length <=
1280 Pixel
0 612505 406d01 407182 416a85 416705
1 612505 416905 407181 40ee05 41be8b
2 612505 414088 41f988 41de09 407a81
3 612505 406c81 407102 416a05 416685
4 612505 41f489 41f10c 407182 405201
5 61fd09 416885 407101 40ed85 413207
6 616905 41f00f 416906 41f98b 410a05
7 61748b 414008 41f908 41dd89 407a01
8 61f08e 41e80c 41e890 41d188 40e203
9 61dc8d 40f405 40f487 411984 41da08
a 617489 -- 407082 416985 416605
b 610085 -- 407c82 40c105 41898c
c 61b489 -- 41f08c 407102 405181
d 61f489 -- 407081 40ed05 413187
e 60c005 -- 41f888 41dd09 41d589
f 617409 -- 407002 416905 416585
Table 9.4-1
There is a 3-byte code for each frequency. The code for the sensor clock is set to sb1…3 of a
returned
PowerUpProfile (command :w).
The code of the pixel frequency corresponds to sa1…3.
Example:
return of frequency codes
On command :w following answer was returned:
6d774ac800006a1c
61788b41da08
0003ff3ff000
07f
030000000000000000000000000000
↵
61dc8d...
Sa1...3, pixel clock (see code of table 20 )
61dc8d = step 9, equivalent to 30,0 MHz
41da08... Sb1...3, sensor clock
according to table 20, mode 3
41da08= step9, equivalent to 5,6 MHz
07f.. Line length 1280 pixel