Introduction
2.1
Overview
The CMOS 3.0 Megapixel CameraLink cameras offer a high photo sensitivity
and therefore make inspection in low light conditions possible. Both BASE and
FULL mode cameras are available as monochrome and color version.
MIKROTRON CameraLink cameras comply with the CameraLink standard. The
camera link standard defines the following items:
n
Three configuration types BASE, MEDIUM and FULL with different data
transfer speeds and
n
The transfer protocol which is used by the frame grabber to communicate
with the camera.
For detailed information about the CameraLink standard, refer to the AIA web
page:
The color versions are equipped with a Bayer filter.
2.2
Scope of delivery
Before installing the camera, check whether the delivery is complete.
The following components are part of the delivery:
n
Camera as ordered
n
F-Mount or C-Mount lens adapter as ordered
n
MIKROTRON Support CD
n
Accessories, if ordered
n
6-pin Hirose connector for the power supply unit
NOTE
If you need a firmware update, inform MIKROTRON via email: info@mik-
rotron.de.
Firmware can be updated remotely via a special updating software.
2.3
Optional accessories
Lenses
You need lenses for 1” sensors; to find lenses or other accessories, visit
Cable
n
KKRDCLSRxx
CameraLink cables with lengths from 0.5 to 8 m are available.
MIKROTRON GmbH / 3CL / CAMMC301x-UG / 2020
11 - 40
