Powering
The device accepts power with the following modes:
Passive 10-30 V PoE to the ethernet port. The higher the voltage needed to compensate for power loss on long cables. At least 18 V is suggested.
Direct input to the power jack 10-30 V.
Maximum power consumption 14 W.
Configuration
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to
the possibilities:
. In case IP connection is not available, the Winbox tool (
) can be used to connect to the MAC address
of the device from the LAN side (all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device from the network, see a section
.
Extension slots and ports
One gigabit ethernet port (With Auto MDI/X so you can use either straight or cross-over cables for connecting to other network devices). The
ethernet port accepts 10-30 V DC powering from a passive PoE injector.
One miniPCIe slot.
This device might be incompatible with the R11e-LTE international modem.
USB slot type A.
SIM card slot.
5 GHz, 802.11a/n for RB912UAG-5HPnD.
2.4 GHz, 802.11b/g/n for RB912UAG-2HPnD.
Reset button
The reset button has three functions:
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10
seconds).
Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15
seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Operating system support
The device supports RouterOS software version 6. The specific factory-installed version number is indicated in the RouterOS menu /system resource.
Other operating systems have not been tested.
Federal Communication Commission Interference Statement
Model
FCC ID
RB912UAG-5HPnD
TV7RB912G-5HPNDM
To avoid pollution of the environment, please separate the device from household waste and dispose of it in a safe manner, such as in
designated waste disposal sites. Familiarize yourself with the procedures for the proper transportation of the equipment to the designated
disposal sites in your area.
