Extension slots and ports
•
One gigabit ethernet port (With Auto MDI/X so you can use either straight or cross-over cables for
connecting to other network devices). The ethernet port accepts 10-30 V DC powering from a passive PoE
injector.
•
One miniPCIe slot.
This device might be incompatible with R11e-LTE international modem.
•
USB slot type A.
•
SIM card slot.
•
5 GHz, 802.11a/n for RB912UAG-5HPnD.
•
2.4 GHz, 802.11b/g/n for RB912UAG-2HPnD.
Reset button
The reset button has three functions:
•
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS
configuration (total 5 seconds).
•
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now
look for a CAPsMAN server (total 10 seconds).
•
Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the
RouterBOARD look for Netinstall servers (total 15 seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Operating system support
The device supports RouterOS software version 6. The specific factory installed version number is indicated in the
RouterOS menu /system resource. Other operating systems have not been tested.
Safety Notice
Electric shock hazard. This equipment is to be serviced by trained personnel only. This is a class A
device, operating it near residential radio equipment could cause radio interference.
See mikrotik.com/products for the latest version of this document.
Document #49289 Modified on: 14.MAY.2019
