Page 11
You can program the microcontroller with a
bootloader which is preprogrammed by default.
To transfer .hex file from a PC to MCU you need
bootloader software (mikroBootloader USB HID)
which can be downloaded from:
Programming with mikroBootloader
Figure 4-2: USB HID mikroBootloader window
step 1 – Connecting MSP432 clicker
01
01
To start, connect the USB cable, or if already connected press
the Reset button on your MSP432. Click the Connect button
within 5s to enter the bootloader mode, otherwise existing
microcontroller program will execute.
After the mikroBootloader software is downloaded,
unzip it to desired location and start it.
https://download.mikroe.com/examples/starter-
boards/clicker/msp432/clicker-msp432-bootloader
zipzip
