Page 6
1. Programming with mikroBootloader
You can program the microcontroller with bootloader which
is preprogrammed into the device by default. To transfer
.HEX file from a PC to MCU you need bootloader software
(
UART mikroBootloader
) which can be downloaded from:
After software is downloaded unzip it to desired location and
start mikroBootloader USB UART software.
http://www.mikroe.com/downloads/get/2055/
mini_m0_bootloader_v220.zip
note
Figure 2-1: mikroBootloader window
mikroBootloader software
01
When you start mikroBootloader software, a window
as shown in
Figure 2-1
should appear
Before starting mikroBootloader software, connect MINI M0 for
STM32 to a PC using a USB cable provided with the package
Summary of Contents for MINI-M0
Page 12: ...Page 12 4 Dimensions 50 8 2000 2 54 100 17 78 700 Legend mm mils...
Page 13: ...Page 13 Notes...
Page 14: ...Page 14 Notes...
