Page 12
01
02
Programming with mikroBootloader
Figure 3-2: USB HID mikroBootloader window
step 1 – Connecting mikromedia
01
02
The microcontroller is preprogrammed with USB HID Bootloader,
which can be used to upload new device firmware. To transfer
firmware .HEX file from a PC to an MCU you need to use the mik-
roBootloader USB HID application, which can be downloaded from:
Upon download, unzip the package to a desired location and start
the mikroBootloader application:
In order to start, connect the USB cable or (if already
connected) press the
Reset
button on your board.
Click the
Connect
button within 5s to enter the bootloader
mode, otherwise the existing program will execute.
www.mikroe.com/downloads/get/2090/
mikrobootloader_tiva_tm4c123gh6p_v130.zip
