Mikroe Codegrip, User Manual

Page: 17 / 44

P A G E 17
C O D E G R I P U S E R M A N U A L
CODEGRIP SUITE
4.1 Menu section 4.3 Shortcuts bar
4.2 Menu item section
As already mentioned, all Menu buttons are located in the Menu section (1)
of the CODEGRIP Suite GUI. By clicking a Menu button , one or more Menu
items are unfolded. Menu items are grouped by the type of the function
they are related to. For example, clicking the CODEGRIP Menu button will
unfold Scanning , Configuration , and License Menu items . All these Menu
items are related to configuring and working with CODEGRIP devices, and
therefore they are grouped under the CODEGRIP Menu button.
The Shortcuts bar (3) is another persistent section of the CODEGRIP
Suite GUI, containing controls for the most commonly used commands. It
appears on the top of the
Menu item section , just below the title bar. The
only Menu item that does not include the Shortcuts bar is the Programming
Menu item since all the shortcut commands are already included there.
Icons on the Shortcuts bar are used to speed up the workflow, providing
easy access to a set of commands from within any Menu item of CODEGRIP
Suite. This is basically a set of commands otherwise found under the
Programming Menu item , including the most commonly accessed
CODEGRIP commands: WRITE command , DETECT command and VERIFY
command , along with the interface used to select .hex or .bin file.
More detailed description about the Shortcut bar commands find in the
Chapter 5.
When a Menu item is clicked, the Menu item section (2) will display all
the GUI elements available for that specific Menu item . For example,
if the Programming Menu item is clicked, the Menu item section of the
GUI will show some basic information about the target and controls for
MCU programming tasks. Each
Menu item will display its own set of GUI
elements in the Menu item section of the GUI interface when clicked.