OPERATION OF CD
MAINTENANCE
Using The Audio Line In
Connection (AUX-Input)
- You can connect the audio output
of an external device such as a
MP3 player to this unit.
1. To connect the external device
use the standard stereo
headphone cable supplied with
the device (3.5mm). Connect one
end to the headphone socket or
Audio line Out on the device, then
connect the other end to the AUX-
IN Socket T on this unit.
See fig. 22.
2. Set the Function Switch L to
"AUX".
See fig. 23.
3. Start playback of the external
device and adjust the Volume
Knob K to the desired level.
4. Switch off the unit when you have
finished using the external device.
13
12
CAUTION:
•
Read safety instructions before
you attempt any cleaning.
•
Always ensure the batteries are
removed and the unit is not
plugged into an external power
source.
•
We recommended cleaning the
CD player with a commercially
available cleaning kit.
fig. 24
fig. 25
fig. 23
fig. 22
To clean the lens
•
If the lens becomes dirty, the player
can skip or not play. If this occurs,
clean the lens in the following
manner.
Carefully remove dust or dust
particles, using a camera lens
blower/brush, blow a few times to
loosen particles, then gently brush
the lens finish cleaning by blowing
the lens again.
See fig. 24.
Clean discs
•
Before playing, wipe the disc from
the centre to the outside with a
cleaning cloth. After playing, store
the disc in its case.
See fig. 25.
T
K
L
