10
11
CAUTION:
•
Read safety instructions before
you attempt any cleaning.
•
Always ensure the batteries are
removed and the unit is not
plugged into an external power
source.
•
We recommended cleaning the
CD player with a commercially
available cleaning kit.
fig. 20
fig. 21
SPECIFICATIONS
MAINTENANCE
To clean the lens
•
If the lens becomes dirty, the player
can skip or not play. If this occurs,
clean the lens in the following
manner.
Carefully remove dust or dust
particles, using a camera lens
blower/brush, blow a few times to
loosen particles, then gently brush
the lens finish cleaning by blowing
the lens again.
See fig. 20.
Clean discs
•
Before playing, wipe the disc from
the centre to the outside with a
cleaning cloth. After playing, store
the disc in its case.
See fig. 21.
IMPORTANT
The wires in this mains lead are coloured as follows:
Blue-Neutral
Brown-Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be connected
to the terminal, which is marked with N or coloured blue. The wire which is coloured
brown must be connected to the terminal which is marked L or coloured brown.
Always ensure that the plug cord grip is fastened correctly. If a 13A (BS1363)
fused plug is used it must be fitted with a 3A fuse conforming to BS1362 and be
ASTA approved. If in doubt contact a qualified electrician.
Technical Data
Model no.
KW-85N
Power Supply
230VAC-50Hz
(8 x C cell/UM-2/LR14 size)
CD Max. Output Power
2 x 1 W RMS
Frequency
AM 530-1600 kHz
FM 88-108 MHz
If you need to replace the fitted plug.
Plug Replacement
WARNING :
Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved 13 Amp BS1363/A plug and the correct rated fuse.
If in doubt, consult a qualified electrician.
BROWN
(LIVE)
CABLE
GRIP
BLUE
(NEUTRAL)
Check that the voltage marked on the product corresponds with your supply voltage.
This product is fitted with a 13A plug complying with BS1363. If this plug is unsuitable
or needs to be replaced, please note the following :
Connecting to Power
