4
3
Preparation Before Use
Aromatherapy box / filter installation (make sure to do before the power plug
is plugged into the socket)
1.
Disassemble the filter cover at the bottom
of the air intake. Place it on the bottom
of the filter cover with your hand, press
firmly with a little force, turn left in the
direction indicated by the arrow to remove
the bottom cover. (Automatically cut off the
power after opening the bottom filter cover)
2.
Remove the filter containing the PE bag.
The filter has been placed in the purifier.
Grab the bag of the filter by hand and
take out the filter.
3.
Take the filter
out of the plastic
bag.
4.
Install the filter.
(1) Install the filter that has removed the
plastic bag into the machine.
(2) After closing the filter cover, turn it to the
right to lock it.
5.
Install the aromatherapy box.
Aromatherapy box is already installed in this
unit. If you need to add or replace essential
oil, please take it out. Then in the following
order, first put the aromatherapy box into
the machine. (Please pay attention to the
installation direction)
Touch button ope display instructions
Filter reset switch
Timer switch
High speed indicator
Medium speed indicator
Low speed indicator
Power
When the power is turned on for the first time, the buzzer will beep and all the display buttons will
light up and the indicator will go out
Power button
In the standby mode, tap the “Power” button
and the machine enters the power on state.
After the power is turned on, the wind speed
defaults to low-level operation, and the
corresponding function indicator lights.
In the power on state, press and hold the
“Power” button for 2 seconds to enter the
standby mode.
Wind speed gear button
In the power-on state, the default wind speed
is low. If you need to switch the wind speed,
you can touch the “Power” button.
Each time the “Power” is tapped, the wind
speed gear is continuously selected by low
speed, medium speed, high speed and
low speed.
Timer
1.When the power is on, press “Timer”
button, the Timer indicator light is twinkling
to show the machine will be off in 4 hours.
Press “Timer” button, the Timer indicator
light is on to show the machine will be off
in 8 hours. Press “Timer” button, the Timer
indicator light is off to show that timer is
canceled.
Filter reset
When the purifying filter replacement
reminder light is on, please turn off the
power and replace the purifier filter. After the
replacement is completed, press and hold
the “Reset” button for 2 seconds, the buzzer
will sound once, the replacement reminder
will reset, and the reminder light will go out.
Aromatherapy module
After removing the aromatherapy cover, the
aromatherapy block can be taken out and
the essential oil can be dripped, and the
essential oil will be evenly distributed with
the air flow.
