-2-
2.Safety Precautions
Please read carefully through the instruction manual and the technical information for proper
use and safety. In this manual, safety precautions are classified by "DANGER" and "CAUTION".
DANGER
When death or serious injury may result
by mishandling
CAUTION
When disability or only physical damage
may result by mishandling
Equipment use (atomic energy, aerospace, medical treatment, transportation, or various
safety devices) that may result in serious bodily injury or loss of life directly by mechanical
failure or mishandling, careful examination is necessary. Contact us for further information. The
company has taken all possible measures to produce a quality product; however, continuous
rotational states when the clutch can not be disengaged or coasting of the machine when the
brakes went off is envisioned as emergency. Please pay attention to safety measures in case
anything goes wrong.
Structural precautions
Touching the product during operation could cause injury. Place a safety
cover to avoid any accident. Additionally, set up a safety mechanism for
quick stop of the product when opening the cover.
Do not use the product near flammable liquids or in the presence of gas
and other explosive air particles.
The driven and driving sides could be completely detached when the
product is damaged. Set up a safety mechanism such as a safety brake to
avoid any danger.
Mounting precautions
Depending on the tightening adjustment of bolt or screw, exceptionally
dangerous situations such as product damage or performance degradation
could occur. Always use a calibrated torque wrench and clamp at the
tightening torque specified by Miki Pulley.
It is very dangerous if the driving part starts by accident while mounting
the product. Be sure that the main power of the equipment is turned off.
Cautions during operation
If the product is used in excess of more than its maximum rated
permissible speed, very dangerous product damage could occur by a large
vibration.
Due to the exposed rotor, touching the product during operation may
cause injury. Make sure not to touch the product during operation.
Using the product with more than the "maximum permissible
misalignment" could cause damage or adverse effect on the equipment.
Always operate the product within the specified "maximum permissible
DANGER