Recoil motor
Insert the key to the key switch.
Open the throttle lever to the idling position.
(Fig.16)
Turn the key to "Run" position. (Fig.17)
When the engine is stopped, the hour
tachometer is always showing "Cumulative
time".(Fig.18)
Hold the recoil starter grip, and pull it a little.
You will feel a slight resistance. Then, pull it
hard to run the engine. be careful not to pull
too hard, or the rope might break or come
off. Allow the starter rope to slowly move
back into the case while keeping the grip
grabbed. (Fig.20)
After the engine has started, warm up the
engine at low speed for 2 to 3 minutes. This
is especially important in cold weather.
Do not pull the starter knob all the length of
the rope.
After engine start, do not let the starter knob
off your hand, but return it slowly by holding it.
If you let the knob off at the position where it
is pulled, the rope retracts suddenly, leading
to breakage of the recoil starter and engine.
While the engine is running, never turn the
key switch to the “START” position.
●
3
4
5
6
7
●
●
●
16
Fig.20
Starter grip
Recoil starter
Gasoline Engine
In case of MVH-508GHS
CAUTION