Manual
LOGO 600SX
- ©Mikado Model Helicopters GmbH - Page 6
5
4x
M3
4x
M3x10
4x
M3x3
2x
10x16x0,5
1x
3x16
1x
M2,5x8
2
1
4
3
(7x)
1x
2,2x6
10x16x0,5
M3x8
M3x10
M3x10
M3 Stopp (4)
M3x20
4 Main Gear & Tail Boom Assembly
Bag 2 • Bag 3 • Bag 8
Bag 2
Swashplate bag 3
Bag 8
Attach the tail boom with a
screw 2.2x6
Tighten the pivot bolts
very carefully. Do not
overtighten them, as
they will break off.
•To remove the battery, rotate locking mechanism until it
locks.
•After inserting a battery, rotate back to secure the battery
plate in place.
Tighten tooth belt:
Pull tail rotor backwards and tighten screws
Carefully push in ... Do not damage the tail
boom holders.
For wider batteries,
you may enlarge this
cut-out.
Modellbau Lindinger GmbH e-Mail: [email protected] www.lindinger.at
