Mikado LOGO 10, Manual

Page: 28 / 64

Manual LOGO 10 Page 28 ©Mikado Modellhubschrauber
4x M2x8 #1902
4x M2 #2070
4x 4,8 #1570
14-15 mm
.551-.591 in
>20 mm
>.787 in
18 mm
.709 in
8 Preparation for Servo Installation
8.3 Servor Arms
Bag 9
8.4 Servo Centering
Now you must decide which pitch
range you wish to use. For different
flying styles, different pitch ranges
must be used. For normal flight with
some aerobatics, choose standard
settings and connect the push rod at
the 18 mm hole on the servo arm. For
3D flight use 20 mm distance instead.
The ball for the tail-rotor servo arm
should be attached with a distance
of 14-15 mm from the servo arm
center.
Connect the servo wires to the re-
ceiver and set all channels in your
transmitter to neutral. Now attach the
servo arms perpendicular to the ser-
vos.
120° CCPM
90° CCPM
Rudder Servo Elevator Servo Aileron Servo left Aileron Servo right
Rudder Servo 3D