QUICK USER GUIDE
Extracting
CAUTION: FRICTION FROM THE ROTATING BLADE WHEN EXTRACTING OR MILL-
ING CAN CAUSE INGREDIENTS TO HEAT AND GENERATE INTERNAL PRESSURE
IN THE SEALED VESSEL. IF THE VESSEL IS WARM TO TOUCH, ALLOW TO COOL
BEFORE CAREFULLY OPENING POINTED AWAY FROM YOUR BODY.
Fill ingredients into the Tall or Short Cup.
Add the liquid of your choice up to the MAX line (Liquid is required!).
Twist the Extractor Blade onto the Tall Cup and hand tighten to make sure the vessel
has been sealed.
Press the vessel blade side-down onto the Power Base. Press down and twist to extract
for no longer than 1 minute. If more extraction is needed, wait 1 minute, then repeat the
extraction process in 1 minute intervals up to 3 times as needed to achieve the desired
consistency. If more than 3 1-minute extractions are needed, allow the power base to
cool for 2-3 minutes after the third extraction before beginning the next round. You can
see the extraction process happening. Keep an eye on the consistency. Your
NUTRIBLAST is ready when it looks smooth and creamy!
To turn off the NUTRIBLAST - simply twist in the opposite direction (to the right) to
release the tabs and stop pressing down on the cup. Once the power base stops
completely, remove the cup from the power base.
1
2
3
4
5
Milling
To turn off the NUTRIBLAST - simply twist in the opposite direction (to the right)
to release the tabs and stop pressing down on the cup. Once the power base stops
completely, remove the cup from the power base.
The Milling Blade is for turning dry ingredients into powders. Perfect for
milling oats, nuts and seeds.
Fill ingredients into the Short Cup.
Twist on the Milling Blade.
Place the Cup onto the Power Base.Press down and twist to lock the
motor on.
Mill your ingredients until you achieve the desired consistency.
1
1
2
3
4
5
2
4
5
3
4
