16
Sound warnings MIKrovent
®
Office
60
/
Professional
120
The device has built-in sound alerts in the form of beeps for mistakes on sensor, fan, shutter,
and filter.
If the device detects an error on the built-in electrical components, it will start to warn you with
a continuous beep.
In this case, turn off the device immediately, disconnect it from the
electrical wrings and call the repairman
.
Troubles
PROBLEM
POSSIBLE CAUSE
REMEDY
The device does not work
and does not turn on.
Power cord is not
plugged in.
Plug in the power cord to
power grid.
The device is damaged.
Contact service
department.
Electrical socket is
damaged.
Try another electrical
socket.
The device beeps
continuously.
Defect on installed
electrical equipment.
Contact the customer
service / repairman.
The device is blowing air
in room at a reduced
speed.
System to dry the device
has turned on.
Wait for the device to dry
automatically.
Device is set to a lower
speed.
Increase the speed on the
remote control.
