6.
Enter “0000” and press “ok” to pair the headset with your mobile phone.
When the pairing is
complete, the headset enters standby mode.
(Note: If the Bluetooth version of your phone is
2.1, there is no need to enter the passkey when pairing.)
7.
Now you can use your Bluetooth headset to listen to music, and make and receive phone
calls. Some mobile phones will connect automatically to RHYTHM when restarted.
Wearing Your Headset
The Left / Right indicator is located on the inside of the headband. Alternatively, always wear the
RHYTHM with the MFB on your right.
Using Your Headset
Answering a Call
When you receive a call, the ring tone will be heard through the headset. Press the MFB once to
accept the call, or answer the call normally via your mobile phone.
Rejecting a Call
Press the MFB for 2 seconds to reject the incoming call.
Ending a Call
Press the MFB once to end the call or hang up on your mobile phone.
Adjusting the Volume
Turn the volume wheel up to increase volume, and down to decrease volume. You will hear a beep
when you reach the maximum or minimum volume level.
Play/Pause Music
When the Bluetooth headset is connected with your mobile phone, press Play/Pause once to play
music. Press it once again to pause music. (Attention: your mobile phone must support A2DP profile.)
Stopping the Music
Press the "Play/Pause” for 2 seconds to stop the music.
Last Track
Press the "Last Track" key to select the last track.
Next Track
Press the "Next Track" key to select the next track.
Transferring a Call
Press the "Play/Pause” button for 2 seconds to transfer the call from your headset to your mobile
phone (please check if your mobile phone has this function). Repeat the procedure to transfer the call
from mobile phone to your headset.
Connection With The Last Paired Device
