-
The product is used in kit (remote control and controller).
The user can reprogram freely according to his needs. A single
remote control can control uncountable controllers, but a
controller can be controlled only by four remote controls
maximum.
ATTENTION :
To connect a LED STRIP to the remote:
Control Multiple:
You can connect several devices according to the combination
you chose. See the example below.
- Choose a cannel between 1 and 4
- Disconnect electrically the LED STRIP which you want to
associate.
- Reconnect the LED STRIP and before 3 seconds press once “ON”
key of the chosen zone.
-Once the connection is done the LED STRIP will flick 3 times
To dissociate a downlight from a zone:
- Check with the remote which zone is connected to the remote
- Disconnect electrically the LED STRIP
- Reconnect the LED STRIP and before 3 seconds press 5 times
“ON” key of the chosen zone.
- Once the connection is done LED STRIP will flick 6 times
3 - Functions
5 - Connections
4 - Programs
- Hold down "ON" key during 2 seconds to get the
white light.
- Set de colors using the tactile color ring.
- Set the luminosity using the tactile arch (-/+)
- To control 4 zones at the same time press “(-)
switching on all”
Press « M » key to select a program
Program 1:
red, green, blue and white
Program 2:
red, green, blue, yellow, purple
Program 3:
DISCO, random color flickering
Program 4:
red flickering 3 times and alter from 0 to 100%
Program 5:
green flickering 3 times and alter from 0 to 100%
Program 6:
blue flickering 3 times and alter from 0 to 100%
Program 7:
Random color change with flickering
Program 8:
In chain color changing
Program 9:
White flickering
1 -The remote is expected to work with reference
7655 (Not included). Do not connect more than 5
meter LED strip without using RGB amplifier (REF:
7527) in order to protect the signal.
Recommendations :
1
-
Verify that the power supply voltage is in accordance: (special DC12 24V LED POWER SUPLY)
2 - Do not connect wires when power is on.
3 - Batteries installation: verify the sense as indicated on the remote control.
LED STRIP RGB + W 5m
5M DE RUBAN LED RGB
ALIMENTATION
ALIMENTATION
ALIMENTATION
w
w
18
w
w
18
Assembly plan model
LED STRIP RGB + W 5m
120x52x20mm
AAA *2pcs
ASS
85x45x23mm
DC12V ~ 24V
RGB 3 channel/ 4 channel
6A
30m
9
Remote
Controller
Dimensions
Power supply
Material
Dimensions
Supply Voltage
Control Mode
Power per channel
Control distance
Numbers of programs
2 - Données techniques
The remote work with AAA/LR3 batteries (not included)
®
NOTICE - INSTRUCTIONS - INSTRUCCIONES - AVVISO - BEKANNTMACHUNG
Ref : 7655-7649
MIIDEX LIGHTING
- 1 rue Isaac Newton 31830 Plaisance du Touch - www.miidex.com
