13
2.2 Battery
2.2.1 Remove and install of the Battery
• When removing the battery follow the following steps:
Push the battery cover towards bottom;
Raise the battery bottom, break out the battery from the
Smart-phone.
• When installing the battery follow the following steps:
Make the battery metal contact completely contact with
the battery compartment metal contact, and then push the
battery to inset the phone.
Put the battery cover on.
Warning: remove battery previous must turn off your
cell phone. It is forbidden to boot or have other external
power of connection directly take out the battery, or
possible damage to the SIM card and a mobile phone.
2.2.2 Battery charging
• Plug the charger connector with the phone, and plug the
charger into the electrical outlet.
• At this time the charge level icon will repeatedly flash at the
top right corner of the mobile phone’s screen; If the mobile
phone charging while power off, a charging indication will
appear on the screen. If the mobile phone was used even
after there was insufficient power, it might take some time
after having begun charging until indication of charging
appears on the screen.
