Miha bodytec m.ove Operating Instructions Manual Download Page 104

Page: 104 / 117

Open the zipper and the fitting aid and take off the i-body

(Fig. 61).

11.2 Cleaning and storage

11.2.1

Cleaning the i-body

and the individual electrodes

Danger of material damage!
– Remove cables.
– Never use the following cleaning agents:

– Synthetic cleaning agents
– Solvents
– Chlorides
– Polishing agents
– Washing/polishing agents
– Aerosol sprays

– Observe the cleaning symbols

Chapter 2.7.3 “Cleaning

symbols” on page 34.

– Do not dry clean the electrodes.
– Do not exceed a water temperature of 105 °F / 40 °C.
– Do not use any fabric softeners and bleach.
– Do not tumble dry.
– Do not iron or treat with steam.
– Do not spin-dry.
– Do not wring out.

Incorrect cleaning can cause material damage of the i-body

electrode vest and individual electrodes.

Fig. 61: Taking off the i-body

Improper cleaning of electrodes

NOTICE

After the training

2021-07-28

miha-bodytec m.ove EMS training device

104

Summary of Contents for bodytec m.ove






















































































































Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands

Miha bodytec m.ove, Operating Instructions Manual

Search results

Summary of Contents for bodytec m.ove

Reviews:

Related manuals for bodytec m.ove

Brands by name

Popular brands