1
ASSEMBLY INSTRUCTIONS
Please keep these instructions for future reference. Adult assembly required.
This table is not a toy & is intended for use by or under the supervision of adults.
Tools required
Philips screwdriver – not included
Standard (flat head) screwdriver – not included
Allen key – included
Note: electric screwdrivers may be helpful during assembly however please set a low torque & use with caution
Assembly tips
Make sure you understand the following before you begin to assemble your games table:
1.
READ THIS MANUAL all the way through before beginning assembly.
2.
Some drawings or images in the manual may not look exactly like your product.
3.
You will need a second adult to assist with this assembly.
4.
Save all packing materials until the parts have been inspected & the table is assembled.
Unpack the pieces
1.
Lay the box on a flat surface (the floor). You may want this near your area of assembly.
2.
Unpack the boxes & parts. Check all parts supplied.
3.
If any parts are missing please contact Mightymast Leisure immediately.
4.
Note that most parts are stored inside the table top. Lift off the air hockey top for access to the parts
underneath.
Step 1
1.
Lift the air hockey top off the pool table & lay aside somewhere safe for now. Either carefully lay it on the
floor or up against a wall. Be careful not to damage the air hockey fan motor.
2.
Remove all accessories & boxes from inside the pool table top.
3.
Now replace the air hockey top back on to the pool table & at the same time thread the fan motor cable
through the hole in the side of the table. Be careful not to pinch the cable.
4.
Use H1 screws to attach both the air hockey & pool top together in the marked places around the sides of
the table as shown below:
