Mighty Seven PA-202, Manual

Page: 5 / 61

5
Air Hydraulic Riveter
The riveting stroke is adjustable
Vacuum regulator (on / off)
Universal air inlet
PA202/312
The adjusting procedure for Hydraulic Air Riveter PA-202 & PA-312
1. Connect the air hose before changing the “rivet nose”.
2. Press the trigger and change the “rivet nose” with the supplied multi-wrench A or B,
then release the trigger and disconnect the air hose.
3. Adjusting the jaw’s distance: Loosen the “lock nut” with the multi-wrench A, then
loosen the “front housing” manually.
4. Place the riveter horizontally and turn the “front housing” upward.
5. Insert a rivet of the same size into the “rivet nose”, and then tighten the “front housing”
slowly until the rivet drops into the “rivet nose” freely.
6. Tighten the “front housing” one half turns more to avoid the jaws from jamming due to
rivet chips accumulating during operation.
7. Complete the adjustment by tightening the “front housing” with the multi-wrench A.