5
Other Mighty Mule and GTO/PRO
Access Controls and Accessories
AUT
OMA
TIC
GAT
E LO
CK
1
2 3
4
5 6
7
8 9
0
Push Button Control (FM132)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and
uses 16 gauge multi-stranded, dual conductor low voltage wire (sold separately).
Pin Lock (FM133)
The Pin Lock
substitutes for the clevis pin at the front end of the
Mighty Mule® gate
operators. Helps prevent theft of the operator from the gate, while allowing quick release of
the operator.
Key Chain Two Button Transmitter (FM134)
The Key Chain Mini Transmitter is a miniature version of the
Mighty Mule® entry trans-
mitter and has the same adjustable code settings. 12 Volt battery included.
Single Button Transmitter (FM135)
The Mighty Mule®
entry transmitter, with adjustable code settings, is standard equipment
with all Mighty Mule®
systems. 12 Volt battery included.
Digital Keypad (FM137)
The specially designed digital keypad can be easily installed as a wireless or wired keypad.
It can be programmed to use up to 25 different personal identification number (PIN) codes.
Each code is face programmable with additional security features built in. Wired installa
-
tions require 16 gauge, low voltage, multi-stranded, dual conductor, direct burial wire (sold
separately). Requires 3 AA batteries (not included).
Mounting Post (FM100) - In Ground
This black powder coated pedestal is designed to provide convenient access to your keypad,
wireless intercom, or other access control device from your vehicle. With its break down
design it is easy to install and works well in most standard applications. Surface Mount
Flanges (F102) and Extensions (F103) for added height are available.
Gate Opening Sensor (FM138)
The Mighty Mule® Gate Opening Sensor is designed for residential and agricultural applications and
is compatible with all
Mighty Mule® automatic gate operator models. The wand is an electromag-
netic sensor, which offers 'hands free' operation of the
Mighty Mule® Gate Operators with a 12 ft.
radius of detection of vehicles in motion.
Automatic Gate Lock Pull-to-Open (FM143)
A
MUST for added security. Solenoid driven, with a steel housing. Unlocks and locks
automatically as gates open and close. Used with Mighty Mule® DC swing gate operating
systems for maximum stability and security. Comes with a keyed manual release. Recom
-
mended for gates over 8 ft. long. Ideal for animal enclosures or high wind areas.
Wireless Entry Intercom / Keypad (FM136)
Allows owner to screen guest at the gate before allowing access to the property. Keypad
also allows owner to give up to 25 programmable entry codes to family, friends or approved
delivery personnel. Codes can be permanent of temporary. Can be wireless up to 500 feet or
hard wired up to 1000 feet. Additional base stations available (F3101MBC).
