MOUNTING
The module is designed to plug into
a standard 8-pin relay socket.
(MP008) is a molded plastic socket
suitable for mounting on a flat surface
or snap into a 2 3/4 inch wide PVC
track (TRK48).
A spring hold-down clip (CLP1) is
available for installation where
vibration may be a problem.
A DIN rail mounted socket (DMP008)
is available for 35mm symmetrical
DIN rail.
A Killark HK Series explosion-proof
housing with dome and 8-pin socket
is available (HKB-HK2D-8).
WARRANTY
The Mighty Module Series of products
carry a limited warranty of 10 + 5
years. In the event of a failure due to
defective material or workmanship,
during the 10 year period, the unit
will be repaired or replaced at no
charge. For a period of 5 years after
the initial 10 year warranty, the unit
will be repaired, if possible, for a
cost of 10 % of the original purchase
price.
Relays are not covered by the
warranty.
CASE DIMENSIONS
INCHES [mm]
Specifications Are Subject To Change Without Notice. © 2007 Wilkerson Instrument Co., Inc. DWG#102453C 3/07
3
4
