SPECIFICATIONS
Input Range
select any range from 0 to 10 Hz min
to 0 to 60 kHz min
Input Sensitivity
any voltage from 50 mV to 100 V peak
Input Impedance
100 kilohms
Option P
Pullup resistor to + input 10 kilohms
Open circuit v12 VDC
Setpoint
0 to 100% of span
Deadband
0.5% to 100% of span
Accuracy
±0.1% of span
Common Mode Rejection
120 dB, DC to 60 Hz
Relay Contacts
(dpdt)
Resistive Load:
5 A max, 150 W max,
220 VAC max, 30 VDC max
Inductive Load:
(Power Factor => 0.4)
2.5 A max, 75 W max,
220 VAC max, 30 VDC max
Transistor Output
(Option V)
Relay drive (12 V coil, ±220 ohms)
or open collector outputs sink 100 mA,
30 V supply max
Operating Temperature
14°F to 140°F / -10°C to 60°C
Temperature Stability
±0.2% of span/°C max
P o w e r
115 VAC ±10%, 50/60 Hz (2.5 W max)
230 VAC ±10%, 50/60 Hz (2.5 W max)
(DC Power Option) (2.5 W max)
12 VDC (limits 10 VDC to 15 VDC)
24 VDC (limits 21 VDC to 32 VDC)
Isolation, DC power supply to input
common: 10 megohms
MM1700 MM1701 & MM1704
Specifications are subject to change without notice. © 2008 Wilkerson Instrument Co., Inc. DWG#101717D 3/15
MOUNTING
MM1700, MM1701 and MM1704 are designed
to plug into a standard 11-pin relay socket.
(MP011) is a molded plastic socket suitable
for mounting on a flat surface or
2 3/4 inch wide PVC snap track (TRK48).
Use (CLP1) hold-down clip if needed.
CASE DIMENSIONS
INCHES [mm]
A Killark HK Series explosion-proof housing
with dome and 11-pin socket is available
(HKB-HK2D-11). A DIN rail mounted socket
(DMP011) is available for 35mm symmetrical
rail.
3
4
