MIGEL GSI 120, User Manual

Page: 8 / 12

Burst of Steam
This function works well for tough wrinkles and heavy fabrics. By pressing
“Burst of Steam” button,an intense burst of steam is emitted from the
soleplate, this can be very useful when removing stubborn creases. The
shot of steam facility can be used only while ironing with high ironing
temperature. For optimal result, there should be 5 seconds rest between
presses of the steam button. To prevent leaking water from the soleplate
2
1. Set the steam selector to position O(=No Steam)
2. As per washing label of various clothes, set the correct ironing temperature
to begin a ironing.
1. Fill water in the iron as per the water-filling methods.
2. Plug the appliance in the socket.
3. If only set thermostat knob to MAX position as per the temperature
indicator, steam iron will be available, otherwise water may leak from the
soleplate.
4. It indicates that the temperature has been ready until the indicator light
goes off.
5. Set the steam selector correctly, increase steam output by pushing the
steam selector back and decrease steam output by forward.
Component Name
Filling with Water
Dry Ironing
Steam Ironing
A. burst steam button
B. Voltage button
C. steam knob
D. contraction push button
Make sure iron is unplugged and the thermostat dial is in the MIN position.
Take the rubber out and put the water into the small hole of the handle.
soleplate. Clean the soleplate with a soft cloth.
3. Keep the soleplate smooth: avoid hard contact with metal objects.
C
B
D
A